Stabilising a cheap tripod
Tripods are cheap as chips nowadays, but the cheaper ones have a few flaws. Most importantly, they are too light, and too unstable. So what do you do when you are working on macro stuff, and your tripod won’t stop vibrating, or the high winds are trying to disturb your photographic peace?
Quite simply, most of the time, your tripod will be unstable because of shoddy construction, which can’t really be helped. The downside is that if there’s movement in the legs, you’ll find that the wind can actually move your tripod around slightly. Normally, this isn’t much of a problem (although if your camera is moving, there’s no point in lugging a tripod around, right?), but if you’re working with macro photography and similar, you might find it a bit cumbersome.
A lot of it can be counteracted by simply adding more inertia to the set-up, however: Make the whole thing heavier, and while it’ll still move, it will move less drastically!
So basically, attach something heavy to the bottom of the tripod, hanging from the bottom rod (the piece that has the tripod head attached to the other end). Some tripods come with hooks attached especially for this purpose, but you can easily make your own with a piece of string, a hook, or something similar.
Alternatively, take a triangular length of fabric, and tie each corner to a leg of the tripod. You now have a hammock in the middle, underneath your camera. Fill it with heavy things (stones, camera lenses, the treasures of the Sierra Madre, whatever you happen to have handy), and your tripod will be firmly pulled to mother earth. The result is that your tripod is held firmly against the ground, and that your camera is held a lot more steady!
Do you like this article? Tell the world using one of these:
[
Digg
|
Facebook
| 
del.icio.us
| 
Stumble Upon ]
reddit_url='http://photocritic.org/stabilising-a-cheap-tripod-2/'
Categories: Photo tips
Tags: stone bag | tripod
This entry is © Haje Jan Kamps / Photocritic.org, and was posted on Wednesday, June 4th, 2008. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
here
#1 - June 4th, 2008 at 12:28
That’s a very good idea to attach sth like this to the legs and put something in, even sand at a beach would do, I think. Incidentally, at a beach you can also dig the legs deeper in the sand, and when shooting moonlit beach at night, try not to put tripod too close to the water, as it also shakes it
#2 - June 6th, 2008 at 18:09
I find if I use the self timer, and gently “step” on the foot of the leg closest to me it helps stabalise the tripod as well.
#3 - June 20th, 2008 at 20:09
@Peter: how do you ensure your composition is the same, especially doing macro stuff? Seems to me, the slightest movement, of even a “gentle” step could be trouble.
#4 - June 21st, 2008 at 19:49
Another way is to hang your (full) camera bag from the top of the tripod. You have to find a way you can work the strap around the top without interfering with the tripod controls, but it’s usually possible. Just don’t have the bag swinging!
Roger
#5 - July 28th, 2008 at 13:55
Eddie Izzard fan?
“treasures of the Sierra Madre”